CLEAR TREE PERC ASH CATCHER

Understanding the specifications ensures you get the right performance and fit for your setup. Here’s a breakdown of what makes this ash catcher work so well.

These specs combine to deliver a stable, compatible, and high-performance filtering tool.

• The 90-degree joint is standard for most non-scientific beaker bongs.
• A 14mm joint size is the most popular size for water pipes.
• Borosilicate glass is the industry standard for quality smoking accessories.

Every part of this ash catcher is designed to improve your experience. These features work together to deliver cleaner, cooler smoke from the powerful percolator to the quality glass.

What Are The Benefits Of A 5 Arm Tree Percolator?

A tree percolator is a classic design known for its impressive diffusion. The "trunk" pulls smoke underwater and sends it through five separate "arms." Each arm has slits at the end, forcing the smoke to bubble up through the water. This process increases the surface area of the smoke that touches water, which rapidly cools it down and filters out impurities for a much smoother hit.

The 5-arm tree perc is the engine of this ash catcher, providing powerful filtration.

• Splits a single smoke stream into many smaller bubbles for diffusion.
• Significantly cools down hot smoke before it reaches your lungs.
• Filters out water-soluble impurities and stray particles.

An ash catcher only works if it fits your piece. Before you buy, run through this quick checklist to ensure total compatibility and avoid any surprises.

Buying Checklist:

• Joint Angle: Does my bong's joint stick straight up (90°) or out at an angle (45°)? This model is for 90° joints.
• Joint Size: Is my bong's joint 10mm, 14mm, or 18mm? This ash catcher is designed for a 14mm joint.
• Joint Gender: Does my bong need a male or female accessory? This ash catcher has a 14mm male joint, so it fits into a 14mm female joint on a bong.

Should I Get A 45 Or 90 Degree Ash Catcher?

The choice depends entirely on your bong's design. Look at the part where you insert your bowl. If it points straight up, you need a 90-degree ash catcher like this one. If it comes out at an angle, you need a 45-degree model. Using the wrong angle will cause the ash catcher to sit improperly and affect its function.

How Do I Know What Size Joint I Need?

The most common joint size is 14mm. An easy way to check is to use a dime; if the opening is slightly smaller than a dime, you likely have a 14mm joint. An 18mm joint is noticeably larger, while a 10mm joint is much smaller. This model is for the popular 14mm size.

Matching the joint angle, size, and gender is critical for a proper fit and function.

• Use a 90° ash catcher for bongs with vertical (upright) joints.
• This 14mm male ash catcher fits into a 14mm female bong joint.
• Confirming your bong's specs before buying ensures a perfect seal.

While a tree perc is a fantastic choice for filtration, other designs offer different benefits. Here’s how it compares to other common styles in a similar price range.

The best ash catcher depends on whether you prioritize smoothness or low drag.

• Tree percs offer maximum cooling at the cost of some drag.
• Honeycomb percs provide an airy, effortless pull with good filtration.
• Dropdowns are best for simply keeping your rig clean without adding filtration.

Keeping your ash catcher clean is vital for flavor and performance. Because of the intricate arms, a tree perc can be tricky to clean, but this simple process makes it easy.

What Are The Steps To Clean A Tree Perc?

1. Rinse It Out: Run hot water through the ash catcher to flush out any loose ash or debris.
2. Add Solution: Pour a cleaning solution like 91%+ isopropyl alcohol into the ash catcher until it’s about 1/4 full. Add a tablespoon of coarse salt for extra scrubbing power.
3. Seal and Shake: Securely plug both openings with your fingers or designated plugs. Shake the ash catcher vigorously for 2-3 minutes, making sure the salt scrubs all internal surfaces.
4. Let It Soak (Optional): For stubborn resin buildup, let the solution sit inside for 30 minutes to an hour.
5. Final Rinse: Dump out the dirty solution and rinse the ash catcher thoroughly with hot water until all alcohol and salt are gone. A final rinse with cool water can help prevent heat shock.

Regular cleaning with alcohol and salt will keep your tree perc hitting like new.

• Use 91% or higher isopropyl alcohol for the best results against resin.
• Coarse salt acts as a mechanical abrasive to scrub the inside of the glass.
• Rinse thoroughly with hot water to remove all cleaning agents before use.

A little preparation before your session and a quick cleanup after can make a huge difference in the performance and longevity of your ash catcher.

How Much Water Should I Put In My Ash Catcher?

Fill the ash catcher with just enough water to submerge the slits on the bottom of the tree percolator arms—usually about 1/3 full. Overfilling can lead to water splashing into your mouth or bong, while underfilling will result in no filtration. Do a gentle test pull without a bowl to check the water level and function before you pack it.

Proper water levels are key to function, and emptying after use prevents buildup.

• Fill with enough water to cover the percolator's diffusion slits.
• Test the water level with a light pull before lighting your material.
• Emptying dirty water after each session makes future cleaning much easier.

This tree perc ash catcher is a great first step in upgrading your setup. To see more options, including different percolator types, sizes, and styles, check out our complete Ash Catchers Collection.