FAT BOTTOM QUARTZ BANGER - 90° DEGREE | BL

Why Does The 4Mm Thick Base Improve Your Session?

This banger's performance comes from its extra-thick base. Unlike standard bangers with thin walls, the extra quartz at the bottom soaks up heat from your torch and releases it slowly and evenly. This stops the sudden temperature drops that can waste concentrates and hurt the flavor. The result is a more efficient, tasty, and longer session from just one heat-up.

The 4mm base is the key to longer sessions and better flavor with stable, low temperatures.

• The thick base means less time reheating and more time dabbing.
• A beveled edge ensures no vapor is wasted when you use a carb cap.
• 100% quartz construction guarantees pure flavor every time.

How Do I Choose The Right Joint Size And Gender?

Picking the correct joint is critical for a perfect fit. You can use our simple checklist to find out what your rig needs. The "gender" refers to the connection type. If your rig has a wide opening, you need a "male" banger. If it has a narrow glass tube that sticks out, you need a "female" banger. The size is the diameter, and 14mm is the most common.

Banger Selection Checklist:

1. Determine Joint Gender: Does your rig's joint receive a banger (needs Male) or fit inside one (needs Female)?
2. Measure Joint Size: Use a ruler or compare to a dime (about 18mm) or a standard pencil (about 10mm) to estimate 10mm, 14mm, or 18mm.
3. Confirm Joint Angle: The joint on your rig should be vertical (90°) for this banger to fit correctly.
4. Choose Base Style: This fat bottom is built for heat retention.
5. Verify Material: This banger is 100% quartz for the best flavor.
6. Select Accessories: Think about getting a matching carb cap for the beveled edge.

Matching the gender, size, and angle of your rig's joint is essential for a stable and working setup.

• Male bangers fit into female joints; female bangers fit over male joints.
• 14mm is the most popular size, 10mm is for mini rigs, and 18mm is for larger pieces.
• We do not recommend this 90° banger for rigs with a 45° angled joint.

What Are The Benefits Of A 90 Degree Joint Angle?

A 90-degree banger is made specifically for water pipes where the joint points straight up. This is common for beaker bongs, straight tubes, and many other scientific glass designs. Using a 90-degree banger on these rigs keeps your bucket flat. This allows concentrates to pool evenly on the thick base and turn into vapor efficiently. It also keeps the hot banger safely away from your face while you use it.

How Does The Beveled Edge Help With Airflow?

The slight angle on the beveled top edge is a premium feature that makes a big difference. It creates a wider surface for your carb cap to sit on, ensuring a snug, airtight seal every time. This tight seal gives you great control over the airflow and pressure inside the bucket, which leads to thicker, more satisfying vapor.

The 90-degree angle and beveled edge are design choices that improve safety, efficiency, and vapor quality.

• The 90° angle provides perfect alignment for common beaker and straight-tube rigs.
• A flat, stable bucket ensures concentrates are vaporized evenly on the bottom.
• The beveled edge creates a tight seal with carb caps for maximum vapor.

When Is This Fat Bottom Banger The Best Choice?

This banger is the perfect tool for when temperature stability is most important, especially for low-temp dabbing. If you want to enjoy the full flavor of your concentrates, this is for you. The thick base reduces temperature changes, preventing the burning that can ruin terpenes. It's also great for longer sessions or for sharing because it stays at the right temperature for a long time without needing to be reheated. Follow these steps for the perfect low-temp dab.

Low-Temp Dab Workflow:

1. Heat the Base: Use a butane torch to heat the 4mm bottom base for 30-45 seconds. Try not to heat the walls directly.
2. Cool Down: This is a key step. Let the banger cool down for 45-60 seconds. The thick base will hold the heat.
3. Apply Concentrate: Use a dab tool to place a small amount of concentrate in the center of the base.
4. Cap It: Immediately place a carb cap on top to trap the heat and vapor.
5. Inhale Slowly: Draw slowly to vaporize all the material at a low, controlled temperature.
6. Clean Promptly: Use a cotton swab to clean out any residue while the banger is still warm.

Choose this banger for low-temperature dabs, long sessions, and getting the most flavor from concentrates.

• Perfect for low-temp dabs that preserve terpenes.
• Maintains a good dabbing temperature for 60 seconds or more.
• Excellent for sharing with friends or for longer solo sessions.

How Does This Compare To Other Bangers?

While our 90 Degree Fat Bottom is a specialist in heat retention, other bangers in our collection offer different benefits. The 45-degree model is for angled rigs, and flat tops heat up faster. Terp slurpers give you the most surface area for large dabs. Here’s a quick comparison.

The Fat Bottom Banger focuses on holding heat, while other styles focus on heating speed or surface area.

• The Fat Bottom design is specifically made for keeping low temperatures steady.
• Flat top bangers have a faster heat-up and cool-down cycle.
• Terp slurpers are designed to vaporize large amounts of concentrate all at once.

How Do You Clean A Fat Bottom Quartz Banger?

Cleaning your banger correctly is key to protecting its flavor and lifespan. The best way is to clean it after every single use. While the banger is warm (but not red hot), use a cotton swab to wipe up leftover residue. For a deeper clean, you can use isopropyl alcohol. Never put a hot banger in cold water or cleaning solution, as the sudden temperature change can cause it to crack.

Regular cleaning with cotton swabs and isopropyl alcohol will keep your banger fresh and working well.

• Clean the banger after every dab to prevent residue buildup.
• Use a dry cotton swab first, then one dipped in isopropyl alcohol.
• Avoid quick temperature changes to prevent cracking the quartz.

What Should I Do Before My First Use?

Before using it for the first time, check the banger to make sure it's clean. You don't need to "season" a high-quality quartz banger, but a quick, gentle heat cycle can be good. Just heat the banger for about 20 seconds and let it cool down completely. This burns off any tiny residues from shipping. Most importantly, make sure you have the right carb cap to fit the beveled edge for a perfect seal.

How Can I Maintain Consistent Heat Retention?

The key to long-term performance is keeping it clean. A clean surface heats more evenly and holds temperature correctly. If residue builds up, it creates hot spots and acts like insulation, which hurts heat retention and ruins the flavor. Clean your banger well after each session, and its performance will stay consistent for hundreds of uses.

A clean banger is a high-performing banger; preventing residue is the key to lasting heat retention.

• A quick heat cycle before the first use ensures purity.
• Using a proper carb cap is essential for performance.
• The best way to maintain heat retention is to prevent residue buildup.

Complete your setup with our full range of quartz bangers and accessories designed for performance and flavor.

• Quartz Bangers & Dab Nails
• Fat Bottom 45 Degree Banger (for angled rigs)
• Carb Caps (to seal your banger)
• Terp Pearls (for even heat distribution)