HONEYBEE HERB 3 ARM SLITED DIFFUESED DOWNSTEM PERC ASH CATCHER

Let's look at how the parts of this ash catcher give you a better experience. Here's a simple breakdown of how each feature helps you.

Each part, from the perc arms to the glass, is picked to improve smoothness, cleanliness, and durability.

• The 3-arm perc is built for a cooler, gentler experience.
• Borosilicate glass provides great strength and heat resistance.
• The design acts as a pre-filter to keep your bong water clean.

Choosing the right fit is easy. This ash catcher uses a standard 14mm male joint, but you must pick the correct angle so it sits upright on your bong.

Should I Get A 45° Or 90° Ash Catcher?

Look at your bong's joint. If it points straight up, you need a 90° ash catcher. If it sticks out at a diagonal angle (like most beaker bongs), you need a 45° ash catcher. The right angle keeps the ash catcher level, prevents spills, and lets the perc work correctly.

How Do I Confirm My Bong's 14Mm Joint Size?

The 14mm joint is very common. If you're not sure, it's about the same size as the tip of your pinky finger and is smaller than a dime. This ash catcher has a 14mm male part, so it fits into a 14mm female joint on a bong.

Picking the right angle (90° or 45°) and size (14mm) for your bong is key for a perfect, no-spill fit.

• Get a 90° ash catcher for bongs with vertical joints.
• Get a 45° ash catcher for bongs with angled downstems.
• This piece is designed to fit into a 14mm female bong joint.

The best part of this accessory is its powerful percolation system. It doesn't just catch debris; it actively improves your smoke quality with a multi-stage process.

What Is A 3-Arm Slitted Percolator?

A 3-arm tree percolator splits the smoke into three paths. Each arm has small slits on its side. When you pull, smoke is forced through these openings, creating a huge number of tiny bubbles. This bubbling gives the smoke more surface area to touch the water, which quickly cools it and filters out impurities.

The 3-arm perc is an advanced part that splits and cools smoke better than a simple downstem.

• The multi-arm design divides smoke for better filtering.
• Slits on each arm create fine bubbles for maximum cooling.
• This process leads to a smoother and cleaner final product.

While our 3-Arm Perc model offers maximum filtration, we have other great options in the same price range. Here’s a quick comparison to help you decide.

For smoothing out your smoke, the 3-Arm Perc is the best option in this price group, performing better than simpler diffusers.

• The 3-Arm Perc offers the highest level of filtration in this lineup.
• A classic downstem ash catcher is a simpler, effective alternative.
• Reclaim catchers are designed for concentrates, not dry herb filtration.

Keeping your 3-arm perc ash catcher clean is important for its performance. Regular maintenance prevents buildup in the delicate percolator slits, ensuring smooth airflow and fresh flavor.

How Do You Clean An Ash Catcher With A 3-Arm Perc?

1. Rinse: Empty the old water and rinse the ash catcher with hot water to remove loose debris.
2. Soak: Place the ash catcher in a sealable bag or container. Fill it with 91%+ isopropyl alcohol and coarse salt until the percolator is submerged.
3. Shake: Seal the container and shake vigorously for 1-2 minutes. The salt acts as an abrasive, scrubbing the inside of the arms.
4. Flush: For stubborn spots, use a pipe cleaner or flush hot water through the main joint to force out any remaining resin.
5. Final Rinse: Once clean, rinse the entire piece thoroughly with warm water until all alcohol and salt are gone.
6. Dry: Let it air dry completely before reattaching it to your bong.

Regular soaking in alcohol and salt is the most effective way to keep the 3-arm percolator functioning perfectly.

• Use a mix of isopropyl alcohol and salt for the best results.
• Shaking the mixture helps the salt scrub internal surfaces.
• A thorough final rinse is essential to remove cleaning agents.

Using an ash catcher correctly from the start ensures you get the best results and avoid common issues. Here is what to check before and what to expect after.

What Should I Check Before Using This Ash Catcher?

Before your first session, verify three things. First, confirm your bong has a 14mm female joint. Second, check that you have the right angle (45° or 90°) for a straight fit. Third, add water. Fill the ash catcher chamber just enough to submerge the slits on the three percolator arms—about 0.5 to 1 inch of water is usually sufficient. Do not overfill, as this can cause water to be pulled into your bong.

What Results Should I Expect After A Session?

The difference is immediate. You will notice that the smoke is significantly cooler on the inhale, reducing throat irritation. The water in the ash catcher will be dirty, while the water in your main bong will be far cleaner than it would be otherwise. This shows the ash catcher is doing its job by trapping debris and providing potent filtration.

Proper water level and a secure fit are key before use, while cleaner water and smoother hits are the expected result after.

• An ash catcher keeps your bong water clean by trapping debris first.
• Adding a percolator ash catcher makes hits feel noticeably smoother.
• Fill with water just enough to cover the percolator slits.

Explore our other collections to find the perfect companions for your new ash catcher.

• Browse the full Ash Catcher Collection.
• Check out compatible bowls and slides in our Bong Accessories hub.