Vented Bell Perc Ash Catcher for Sale

Halloween Sale! Buy One Get Second Item 50% Off

The Hittn Vented Bell Perc Ash Catcher is a 14mm, 45° glass add-on for a compatible water pipe. Its vented bell perc gives the incoming smoke an extra water-filtration stage, while the catcher collects ash and debris before it reaches the main chamber.

This is the version to look at when your bong uses a 14mm female joint at a 45° angle. Before ordering, match the joint size, gender, angle, and available clearance around the bong. For more options, browse the ash catcher collection.

Key Features

Vented bell percolator for an added water-filtration stage.
14mm male joint with a 45° connection angle.
Borosilicate glass construction with Black, Blue, Green, and Purple color options.

Product Specifications

Specification	Details
Brand	Hittn
Product Type	Vented bell perc, ash catcher
Material	Borosilicate glass
Joint Size	14mm
Joint Gender	Male
Angle	45°
Color Options	Black, Blue, Green, Purple

Also Known As

Percolator Ash Catcher

Will This 14mm 45° Ash Catcher Fit My Bong?

Match it to a bong with a 14mm female joint that sits at a 45° angle. The male/female connection and joint size both need to match, so check your piece before ordering. If you are unsure of the size, use Honeybee Herb's joint-size guide. Also check that the ash catcher has enough room to sit without contacting the base or body of the bong.

How Much Water Should You Add?

Add enough water to cover the bell perc's diffusion openings, then take a gentle test pull before use. If water carries into the main piece, reduce the level. The goal is to keep the perc submerged without overfilling the catcher.

How Should You Clean the Vented Bell Perc Ash Catcher?

Empty the water after use and rinse away loose debris. For heavier buildup, the current HBH care guidance uses coarse salt with 91%+ isopropyl alcohol, followed by a thorough warm-water rinse and air drying.

FAQ

What Angle Ash Catcher Do I Need For A Beaker Bong?

For nearly all beaker bongs, you will need a 45° angle ash catcher. This angle matches the diagonal joint on the beaker, ensuring your bowl and the ash catcher sit level for proper function and stability.

Does A Bell Perc Ash Catcher Add Much Drag?

No, the bell perc is known for its efficient, low-drag design. While any water filtration adds a little resistance, the vented bell provides excellent diffusion without the heavy pull you might find with other percolator types.

How Much Water Should I Put In An Ash Catcher?

You should add just enough water to cover the diffusion slits at the bottom of the bell percolator, usually about 1/4 to 1/3 full. Overfilling can cause water to splash into your bong. Test it with a gentle pull to check for good bubble action and adjust if needed.

Do I Really Need A Keck Clip For My Ash Catcher?

A keck clip is not required but is highly recommended. It’s a small plastic clip that secures the joint between your ash catcher and bong. This adds stability and helps prevent accidental separation, protecting your glass from drops or wobbles.

What’s The Difference Between An Ash Catcher And A Reclaim Catcher?

An ash catcher is for use with dry herbs to keep ash out of your bong and has a percolator for water filtration. A reclaim catcher is for concentrate rigs and is designed to collect leftover oils without water.

Please verify your age

Products are for tobacco use only.

Are you 21 or older?

Yes No

Your cart is empty

VENTED BELL PERC ASH CATCHER

VENTED BELL PERC ASH CATCHER

Angle: 45° Degree

Size: 14mm

Color: Black