Cleaning your Puffco Proxy regularly helps keep your flavor fresh, provides a smooth experience, prevents residue buildup, and extends the life of your atomizer. “Additionally, regular cleaning can boost your impression in the dabbers community.”
To clean, cool the device, disassemble it, swab the chamber with isopropyl alcohol (ISO), or soak it for deep cleaning. You can use Honey Dab Swab for cleaning every corner. Clean the base contact points, then soak the glass in ISO before drying. Maintain a routine cleaning schedule, avoid forcing connections, and never use the device until it has cooled completely.
In this blog, you’ll learn:
- “How to deep clean the Puffco Proxy chamber”
- “How often should you clean your Puffco Proxy”
- “The best way to clean the base and glass”
- “Isopropyl alcohol cleaning instructions”
- “Puffco Proxy cleaning tips to avoid damage”
- “How to remove chamber residue”
What Is Puffco Proxy & Why Cleaning Your Puffco Proxy Is Non-Negotiable?
A Puffco Proxy is a new electronic device on the market created by Puffco. This electronic way of dabbing is unique and functional with the help of an electric heating element vs using a torch.
It is always, always recommended to regularly clean and maintain your Puffco to avoid residue buildup, keep the automizer lasting longer, and preserve the taste and quality of each hit you take when it is properly cleaned.
How Do You Know When It’s Time For Puffco Proxy Cleaning?
You know when it's time to clean by keeping yourself on a routine cleaning schedule, every few days, or by noticing any residue build-up that has started to occur within the proxy, or according to Puffco themselves, anytime the battery dies.
How To Clean Your Puffco Proxy: Step-By-Step Guide
-
Step 1: Cool It Down
-
Step 2: Disassemble
-
Step 3: Clean The Chamber - Remove the chamber by disconnecting the three prongs. For light cleanings, you can use an iso dipped swab and swab it out; for deeper cleanings, you can submerge the chamber in iso for 20/30 minutes. The tether can be removed and reattached, and also soaked, but be aware that soaking the tether can cause the silicone to expand, but it should shrink down to normal according to Puffco.
-
Step 4: Clean The Base - Remove the glass and chamber. Clean contact points with an iso dipped swab. Do not get water or dust on the USB port. Make sure the base is completely seated when reattaching.
-
Step 5: Glass Cleaning - Remove the glass and submerge it in Iso and allow it to soak. Rinse and allow to thoroughly dry before next use.
Even though for cleaning this device, you should have used the best cleaning supplies with the best ingredients, so that you can easily remove residue and make the device shine.
Top Tips For Maintaining Your Proxy
Keep a routine schedule for cleaning your proxy; this will ultimately help prolong its lifespan. Store in a safe space to avoid any potential accidents. Keep a charged battery and turn it off when not using it. Properly clean it with iso and avoid getting electrical and heat components wet.
While maintaining your Proxy's cleanliness is crucial, using the appropriate Puffco Proxy accessories greatly improves its functionality. See our Puffco Proxy Accessories Guide for additional information.
Puffco Proxy Cleaning Mistakes To Avoid
Avoid using it over and over and over again without cleaning in between. Do not use if it has not thoroughly dried after soaking in iso, remember alcohol is flammable! Never try to force a connection between any of your Puffco pieces. Make sure they are all aligned properly before reattaching, especially the chamber with its three prongs.
Conclusion: Keep Your Puffco Proxy Running Smooth
And that's that! Proper cleaning and maintenance, whether you are an avid user or just a noob, is important to keep your accessories in top-notch condition. Additionally, regular cleaning keeps your Puffco Proxy running smoothly and flavorful.
For even better performance, check out our Puffco Proxy Accessories Guide to see which device can take your sessions to the next level. This ensures the longevity of your product, the overall flavor of your dab, cleanliness, and keeps your automizer lasting longer.
FAQs
First, cool it down with water, then soak it in iso alcohol for 20/30 minutes. And after soaking, scrub it with swabs or Q-tips for cleaning the very narrow corners.
Solid Red is overheating, and Red and White flashes indicate that your chamber connection is off. This could mean you need to clean or remove and reattach the chamber.
As long as it is 100% dry, wait until it is if it is still wet. Because if you soak your Puffco in iso for cleaning, this iso is flammable, so it has possibility to happen a dangerous situation.
You get residue build-up, bacteria build-up, automizer issues, and overall changes the taste and quality of your experience.
You should clean your Puffco Proxy to keep the flavor fresh, prevent residue buildup, and extend the life of your atomizer.
You should clean your Puffco Proxy every few sessions or whenever residue builds up. For the best performance, Puffco recommends cleaning after each battery cycle to keep the atomizer lasting longer.
Yes, you can soak the chamber and glass in isopropyl alcohol to remove residue. Avoid soaking the base or electrical parts because the combination of water and electricity can cause accidents.
