FAT BOTTOM QUARTZ BANGER - 45° DEGREE | BL

The performance of this banger comes from its specific design and material choices. Here’s a breakdown of how each specification gives you a better dabbing experience.

These specifications combine to deliver superior heat management and usability for the modern dabber.

Choosing the correct joint size and gender is essential for an airtight fit. Use this guide to match the banger to your rig. If your rig's joint is female (a wider opening), you need a male banger. If your rig's joint is male, you need a female banger.

• For a 10mm Female Rig Joint: Select the 10mm Male Banger.
• For a 14mm Female Rig Joint: Select the 14mm Male Banger.
• For a 18mm Female Rig Joint: Select the 18mm Male Banger.

Selecting the correct joint size ensures stability and prevents any wobble or air leaks, which are critical for efficient dabbing.

Beyond the basic specs, three key features define the performance of this Fat Bottom banger: its thermal mass, edge design, and neck angle.

Why Is A Fat Bottom Better For Heat Retention?

The "fat bottom" refers to the banger's extra-thick 4mm quartz base. This increased thermal mass acts like a heat battery, absorbing and holding heat for a longer period than standard 2mm bangers. This means you can heat the banger, wait for it to cool to the perfect low temperature (around 450-550°F), and it will stay in that optimal window long enough to vaporize your entire dab.

What Is The Purpose Of A Beveled Edge?

The beveled edge is a smart upgrade. Instead of a flat top, the rim of the banger is angled inward, creating a more secure, flush connection when you place a carb cap on top. This airtight seal is crucial for building pressure inside the banger, allowing for effective vaporization at lower temperatures and ensuring no terpene-rich vapor escapes.

When Should You Choose A 45-Degree Banger?

You should choose a 45-degree banger when your dab rig's joint comes out at a diagonal angle. Using a 45-degree banger on a matching rig joint ensures the bucket of the banger sits perfectly flat and level. This prevents concentrates from pooling in a corner, promoting even heating and complete vaporization. Using a 90-degree banger on a 45-degree joint would cause it to tilt and waste material.

These design choices work together to produce more flavorful and efficient dabbing sessions.

Take advantage of your fat bottom banger's heat retention with the cold start method. This technique preserves terpenes for maximum flavor.

1. Load First: Place your desired amount of concentrate into the cold, clean banger.
2. Apply Gentle Heat: Use a butane torch to heat the bottom of the banger in short, even bursts. Keep the flame moving to avoid hot spots.
3. Watch for Bubbles: As soon as the concentrate begins to melt and bubble (usually 10-15 seconds), stop heating immediately.
4. Cap and Inhale: Place your carb cap on the beveled edge to create a seal and begin to inhale slowly.
5. Manage Airflow: Use your carb cap to direct airflow around the bucket, ensuring all concentrate is vaporized evenly.
6. Clean Immediately: After your dab, use a cotton swab to wipe out any remaining residue while the banger is still warm (but not red hot).

This method avoids overheating your concentrates, preventing a harsh taste and preserving the delicate flavor profile.

While many options exist, our Fat Bottom banger provides a strong balance of features and value in the under $50 category.

Our banger offers premium features like a thick base and beveled edge at a highly competitive price point.

Proper cleaning after every use is the most important factor in extending the life of your quartz banger and preserving its pure taste.

How Do I Prevent My Fat Bottom Banger From Chazzing?

"Chazzing" is the cloudy, white buildup that can permanently damage a quartz banger. To prevent it, always clean the banger after each dab. While it is still warm (but not glowing), use one or two dry cotton swabs to wipe out all reside. For stubborn spots, dip a fresh swab in 99% isopropyl alcohol and clean the surface, followed by a final dry swab. Never apply a torch to a dirty banger, as this will bake the residue into the quartz.

Consistent post-dab cleaning is the key to keeping your quartz banger looking and performing like new for years.

What Does The "Bl" In The Product Name Stand For?

The "Bl" in the name stands for Beveled Line, referring to the banger's beveled edge. This design feature helps create a superior seal with your carb cap for better dab efficiency.

What Is The Best Carb Cap For This Banger?

Thanks to its 25mm diameter and beveled edge, this banger works well with most carb caps. Bubble caps and directional airflow caps are excellent choices as they allow you to move oil around the large surface area.

How Long Should I Heat A Fat Bottom Banger?

For a traditional dab, heat with a torch for about 30-40 seconds, then let it cool for 45-60 seconds. For a cold start, heat only for 10-15 seconds, just until the concentrate melts. Exact times vary by torch and preference.

Is This Banger Good For Cold Start Dabs?

Yes, it's perfect for cold starts. The thick bottom distributes heat gently, allowing you to heat the concentrate just to its vaporization point, which preserves terpenes and maximizes flavor.

Is A 45 Or 90 Degree Banger Better?

Neither is "better"—they are for different rigs. Use a 45-degree banger for a rig with a 45-degree joint. Use a 90-degree banger for a rig with a 90-degree (vertical) joint to ensure the bucket is always level.

Looking for other options or accessories? Browse our full collection of bangers, nails, and inserts to find the perfect addition to your dab rig.

• Shop All Quartz Bangers & Dab Nails