HONEYSUCKLE DIAMOND SUNDIAL QUARTZ BANGER - 90° DEGREE

Let's look at the specs to see why the Diamond Sundial is special. We chose each detail to make your experience better.

These features work together to create a durable, efficient banger that's amazing for flavor and low-temp use.

• The 2.5mm walls balance quick heating with solid heat retention.
• A full-weld joint is tougher and handles heat stress better long-term.
• The 90-degree angle helps your banger sit flat on most modern rigs.

The design of the Diamond Sundial has special features to solve common problems with standard bangers, from durability to performance.

What Makes The Sundial Airflow So Effective?

The "sundial" is the bottom dish with angled air slits. When you inhale, these slits create a vortex that pulls your concentrate up into the main banger with hot air. This action increases the surface area for vaporization, making sure no material is left behind. We designed it to get everything out of your dab.

Why Is A Full Weld Build Better?

A full-weld banger means the neck and bucket are melted together into one seamless piece. This gets rid of the weak connection point you see on cheaper bangers. The result is a stronger, more durable banger that handles repeated heating and cooling without breaking at the joint.

This mix of sundial airflow and a full-weld build offers top efficiency and durability.

• The sundial airflow actively moves your concentrate to the hot surfaces.
• This efficient vaporizing is perfect for saving terpenes at low temperatures.
• The full-weld build strengthens the banger where it's most likely to break.

The right banger depends on what you want. Here’s how our Diamond Sundial terp slurper compares to other popular styles in the same price range.

The Diamond Sundial is your top choice if you want efficiency and the best flavor from your concentrates.

• Terp slurpers are the most efficient because they vaporize all your material.
• Standard buckets are easy to use and clean but can sometimes be wasteful.
• Blenders work well for large dabs but need special accessories.

A terp slurper works a bit differently from a standard banger. Following our steps will help you get thick, flavorful vapor without overheating the quartz.

What Is The Best Way To Heat This Banger?

For low-temp dabs, aim your torch at the bottom dish and the lower part of the cylinder for 30-40 seconds. Let it cool for 50-70 seconds, or until it's about 450-550°F. Dab your concentrate onto the outer dish, not inside. The vacuum from your inhale will pull it into the hot chamber to vaporize.

Do I Need Terp Pearls With This Design?

It's not required, but adding a terp pillar or a few 4-6mm terp pearls will make it work even better. When you inhale, the pillar or pearls spin to spread the melted concentrate around. This ensures it vaporizes faster and more completely.

Correct heating and accessories like terp pearls will unlock the banger's full flavor-saving power.

• Heat the bottom dish and lower chamber, then let it cool to your preferred temp.
• Put your concentrates on the outside dish, not straight into the banger.
• We recommend using terp pearls or pillars for the most vapor.

Good care is key to keeping your quartz banger clear and working well. You can avoid "chazzing" (black, baked-on gunk) by cleaning it right after each session.

How Do I Clean This Banger Without Causing Damage?

The safest way to clean it is with an isopropyl alcohol (ISO) soak. Never put a hot banger in water or cleaning solution, as the rapid temperature change (thermal shock) can cause it to crack.

1. Cool Down: Let the banger cool all the way to room temperature after you use it. This is the best way to prevent cracking from thermal shock.
2. Disassemble: Take out the top marble, terp pearls, or pillar.
3. Soak: Place the banger and accessories in a container with 91% or higher isopropyl alcohol for 15-30 minutes.
4. Agitate: Use a soft cotton swab to gently scrub any tough spots.
5. Rinse & Dry: Rinse everything thoroughly with warm water and let it air dry completely before you use it again.

Regular ISO soaks after the banger has fully cooled will keep it looking new and stop gunk from building up.

• Always let the quartz cool to room temperature before you clean it.
• Soaking in 91%+ isopropyl alcohol is the most effective cleaning method.
• Never use a torch to burn off residue, as this can permanently damage the quartz.

A good routine keeps your gear in great shape and ready for your next session.

Before First Use
Before you use it the first time, heat the banger until it glows slightly red, then let it cool completely. This burns off any leftover material from when we made it. After that, give it a quick clean with a cotton swab and ISO alcohol, then rinse and dry.

After Every Dab
While the banger is still warm (but not super hot), use a dry cotton swab to wipe up any leftover oil. This simple step makes deep cleaning much less necessary and prevents buildup.

Get the most from your new banger with these key accessories and browse our full collection.

• Explore the entire collection of Quartz Bangers & Dab Nails.
• Find the perfect seal with our Carb Caps for 20mm Bangers.
• Enhance vapor production with Terp Pearls and Accessories.