MILKYWAY EMPEROR’S LEGACY WET ASH CATCHER

What Specs Matter For A Cleaner Session?

Understanding the details of this ash catcher ensures it will fit your water pipe and work as you expect. Each feature is designed to make your sessions better and cleaning easier. Here are the key specs for this piece.

The mix of a 14mm joint, 45-degree angle, and borosilicate build creates a compatible, durable, and effective upgrade.

• The 14mm joint is one of the most common sizes in the industry.
• A 45-degree angle is designed to keep the bowl upright on angled stems.
• Borosilicate glass is known for its strength and heat resistance.
• A wet ash catcher offers more filtration than a dry one.

What Does A Wet Ash Catcher Do?

A wet ash catcher does two main things. First, it works as a pre-filter, catching ash and resin in its own chamber. Second, because it holds water, it starts cooling the smoke before it even gets to your main water pipe. This gives you a cleaner, smoother hit and means you don't have to clean your bong as often.

How Does The Design Improve Your Experience?

The Emperor's Legacy design is functional, not just stylish. Its 5-inch height and chamber size give good filtration without adding too much drag or making your piece easy to tip over. The clear glass lets you see when the water needs to be changed, while the sandblasted design adds a unique look. It's a practical upgrade that also makes your setup look better.

This accessory filters and cools smoke while trapping debris, all in a balanced and visually appealing design.

• It provides pre-filtration to keep your main water pipe cleaner.
• The extra water diffusion helps cool smoke for a smoother inhale.
• Its 5-inch height is a good balance between function and stability.
• The Emperor's Legacy design is a unique visual upgrade.

How Much Water Should I Add To This Ash Catcher?

Using the right water level is key for great performance. Add just enough water to cover the bottom of the downstem or any percolator slits inside. A good rule of thumb is to fill it about one-quarter of the way up. Don't overfill it, as this can cause water to splash into your main piece.

What Are The Steps For Setting It Up?

Setting up your new ash catcher is a simple process. Follow these steps to get started correctly.

1. Rinse: Before the first use, rinse the ash catcher with warm water to remove any dust.
2. Fill: Add a small amount of cool water, just enough to cover the internal percolator.
3. Attach: Carefully insert the ash catcher’s male joint into the 14mm female joint on your 45-degree water pipe.
4. Insert Bowl: Place your 14mm male bowl into the top joint of the ash catcher.
5. Test Draw: Take a gentle pull without lighting anything to check the airflow and make sure no water splashes up.
6. Enjoy: Your ash catcher is now ready to use.

Setup is quick, involving a rinse, a little water, and checking the connection before you start.

• Only add enough water to cover any percolation slits.
• Overfilling can lead to water splashing into your main bong.
• Always test the airflow gently before your first real use.
• Make sure all connections are snug to prevent air leaks.

What Are Some Other 14Mm Ash Catcher Options?

While the Emperor's Legacy is a great piece, we carry other options in a similar category. This table compares a few 14mm ash catchers we recommend to help you see how it stacks up.

The Emperor's Legacy offers a special blend of themed design and effective wet filtration at a mid-range price point.

• Basic ash catchers provide simple function at a lower price.
• Percolator ash catchers can offer even more diffusion.
• Dry ash catchers are a good alternative if you want to avoid using water.
• The Emperor's Legacy combines a premium design with solid function.

How Do I Clean This Ash Catcher?

Cleaning your ash catcher is much easier than cleaning your entire bong. For the best results, change the water daily. To deep clean it, just empty the old water, add a mix of isopropyl alcohol (91% or higher) and coarse salt, cover the openings, and shake gently for a minute or two. Then, rinse it well with warm water.

Daily water changes and a weekly clean with alcohol and salt will keep it working and looking great.

• Change the water in your ash catcher every day to prevent buildup.
• Use a mixture of isopropyl alcohol and salt for a deep clean.
• Shake for 60 to 120 seconds to get rid of stubborn resin.
• Rinse completely with hot water after you finish cleaning.

What Should I Check Before My First Use?

Before you attach your new ash catcher, run through this quick checklist. It helps ensure a perfect fit and function while avoiding common issues like a wobbly connection or a poor seal.

• Joint Size: Confirm your water pipe has a 14mm female joint.
• Joint Angle: Make sure your piece has a 45-degree joint so the ash catcher sits upright.
• Clearance: Check that there is enough space so the 5-inch ash catcher doesn't hit the base.
• Water Level: Fill the catcher with just enough water to cover the perc, but no more.
• Seal Test: Attach everything and do a dry pull to check for a tight seal with no air leaks.

Checking your bong's joint size, angle, and clearance ahead of time will guarantee a perfect, stable fit.

• Verify both the size (14mm) and angle (45°) of your bong's joint.
• Ensure there is enough physical space for the accessory.
• A proper seal is important for good performance.
• A quick check can prevent frustrating setup problems.

What Other Styles Of Ash Catchers Are Available?

The Emperor's Legacy is a great pick for 14mm, 45-degree setups. If you need a different size, angle, or percolation style, we have many other options to suit your piece and preferences.

You can see all the different sizes and designs in our main category.

Explore the full Ash Catchers collection