MULTI CHAMBERED COLORFUL SHOWERHEAD PERC RECYCLER RIG

Understanding the components of this rig shows how each part contributes to a better session. From the material choice to the percolator design, every element has a purpose.

What Specifications Make This Rig Stand Out?

The teamwork between the recycler function and the showerhead perc is what defines this rig's performance. Together, they create a closed loop of cooling and filtration that you can see in action.

How Does The Recycler Path Provide Smoother Hits?

The external tubes and second chamber make up the recycler path. This path forces vapor to travel a longer distance, giving it more time to cool down. As water drains back to the main chamber, it creates a vortex that reduces splash and keeps airflow steady. This process ensures every hit is dense, flavorful, and comfortably cool.

What Are The Advantages Of A Showerhead Percolator?

A showerhead percolator is a vertical, flared tube with many slits around its base. It's known for its reliability and excellent diffusion with very little drag. When you inhale, vapor is forced through these slits, breaking it into countless small bubbles. This increases the surface area of the vapor that touches the water, resulting in powerful filtration and a silky smooth feel.

• The recycler function extends the vapor path for better cooling.
• A vortex action in the recycler prevents water from splashing up.
• Showerhead percs are known for providing smooth diffusion with low drag.
• This combination leads to hits that are both flavorful and comfortable.

Getting the most from your recycler rig involves a few simple steps. The water level is the most critical part for it to function correctly. Follow this guide for a perfect session.

1. Fill with Water: Add just enough water to cover the slits of the showerhead percolator. Do not overfill.
2. Attach Banger: Place your favorite quartz banger into the female joint.
3. Heat the Banger: Use a torch to heat the banger until it glows, then let it cool for 30-60 seconds, depending on your preference.
4. Apply Concentrate: Use a dab tool to place your concentrate inside the hot banger.
5. Inhale & Cap: Cover the banger with a carb cap and inhale slowly and steadily from the mouthpiece. You can watch the recycler in action.
6. Clear the Rig: After your draw, remove the carb cap to clear any leftover vapor from the chambers.

What Is The Correct Water Level For A Recycler?

The ideal water level for this rig is just enough to cover the slits on the showerhead percolator by about a quarter-inch. Too little water will reduce filtration, while too much can stop the recycling action and create a sluggish draw. Do a quick pull test without heat to make sure the water cycles smoothly and doesn't splash toward the mouthpiece.

• Fill the rig with water to just above the percolator slits.
• Overfilling can stop the recycler function and cause a heavy pull.
• A slow, steady inhale is best for activating the recycler action.

While showerhead percs offer a great balance, different percolator styles provide unique experiences. Here’s a quick look at how they compare.

Which Type Of Percolator Is Best For Dabs?

• Showerhead percs offer high filtration with relatively low drag.
• Honeycomb percs have very low drag but can be difficult to clean.
• Matrix percs provide strong filtration but can have more drag.

Keeping this recycler clean is the key to preserving its function and flavor. The complex pathways can trap residue, so regular maintenance is important.

How Do You Prevent Clogs In A Recycler Rig?

To prevent clogs, rinse the rig with hot water daily to flush out fresh reclaim. For a deep clean, fill the rig with a solution of 91%+ isopropyl alcohol and coarse salt, then shake it well. The salt acts as a scrubber on the internal surfaces. Pay close attention to the narrow tubes of the recycler path and the slits of the perc. Rinse thoroughly with warm water when you are done.

• Daily hot water rinses help flush out fresh residue.
• Use isopropyl alcohol and coarse salt for deep cleaning sessions.
• It is very important to rinse all alcohol and salt from the rig after cleaning.

A few quick checks before and after your session will keep your rig in top shape and ready for your next use.

What Should I Check Before My First Session?

• Before Use: Inspect the glass for any cracks. Check the water level and do a test pull to ensure a smooth recycling function without splashback. Make sure your banger fits securely in the joint.
• After Use: Rinse the rig with hot water to remove any immediate residue. Empty the water and let the rig air dry to prevent buildup and keep your next session tasting fresh.

This rig is a fantastic centerpiece for any collection. Explore our full range of Dab Rigs to see other styles, or find the perfect quartz banger to pair with your new piece.