RECYCLER DAB RIG

Every part of this Hittn rig is chosen to create a better dabbing experience, from its common joint size to the heat-resistant glass.

• Features a 14mm female joint for wide accessory compatibility.
• Built with durable, heat-resistant borosilicate glass.
• A showerhead percolator and a recycler chamber provide two stages of filtration.

Beyond its impressive look, the smart design of this recycler rig is what makes it special. The way the percolator, recycler loop, and splash-free mouthpiece work together creates a great experience every time.

Why Is Constant Water Circulation Important For Flavor?

Constant water circulation keeps vapor from getting stale or harsh. As it loops with fresh water, the vapor stays at a better temperature, preserving the delicate terpene profile of your concentrates. This means you taste the concentrate itself, not overly hot or burnt vapor.

How Does The Design Prevent Splashback?

The drain is the key. After water and vapor travel up the recycler's outer tube, the water's weight pulls it back down through a separate drain. This action separates the water from the vapor path just before you inhale, making sure no unwanted splash reaches the mouthpiece.

• The recycling function is designed to maximize both flavor and cooling.
• A separate drain for water stops splashback before it can happen.
• The design is great for low-temp dabs where flavor is the top priority.

Getting started with this rig is simple. Follow these steps for a perfect session, ensuring you get the full benefit of the recycling function.

What Is The Right Water Level For A Recycler?

The best water level is just enough to cover the percolator's slits by about a quarter-inch. To fill it, pour water into the main chamber until the perc is covered. Then, take a gentle pull from the mouthpiece to make sure the water cycles and drains smoothly. If you get splashback, you have added too much water.

6-Step Guide To Your First Session

1. Rinse and Fill: Rinse the rig with clean water. Fill the base just enough to submerge the showerhead percolator.
2. Test the Function: Give a gentle test pull. Watch the water cycle through the external chamber and drain back down. Adjust the water level if needed.
3. Attach Banger: Place your 14mm male quartz banger into the female joint.
4. Heat the Banger: Heat your banger to your preferred temperature, then let it cool for 30-60 seconds for a low-temp dab.
5. Apply Concentrate & Cap: Apply your concentrate to the banger and immediately place a carb cap on top.
6. Inhale Slowly: Inhale slowly and steadily. Watch the vortex in action as the rig cools and filters the vapor.

• Fill the rig with just enough water to cover the percolator's diffusion slits.
• A quick test pull will confirm the recycling works without splashing.
• A slow, steady inhale helps maximize filtration and cooling.

While every dab tool is useful, the recycler provides a special balance of filtration and flavor that sets it apart from other popular options.

• It provides more cooling than a basic mini rig or nectar collector.
• Its flavor protection is better than what you get from simpler beaker rigs.
• While less portable than a nectar collector, it offers a much higher quality session.

Keeping your recycler clean is key for good performance and flavor. The multiple chambers might look tricky, but the cleaning process is simple with the right method.

What Is The Best Way To Clean A Recycler's Chambers?

The best way to clean it is with isopropyl alcohol (91% or higher) and coarse salt. First, pour out the old water. Then, add a good amount of salt and enough alcohol to swish around inside. Plug the openings with your hands or cleaning plugs and shake it well. The salt will gently scrub the inside walls. Finally, rinse everything thoroughly with hot water.

• Use isopropyl alcohol (91%+) and coarse salt for the best cleaning results.
• Shake the rig firmly after plugging all of its openings.
• Rinse with hot water until all alcohol and residue are completely gone.

A consistent routine will help your rig last longer and make sure every session is clean and enjoyable.

Before Use Checklist

• Check the glass for any chips or cracks.
• Rinse with fresh water to remove any dust.
• Fill the rig to the correct water level.
• Do a test pull to check the recycling function.
• Make sure your banger is clean.

After Use Checklist

• Let the rig and banger cool down completely.
• Empty the used water from the rig.
• Rinse the rig with hot water to remove fresh residue.
• Clean your banger with a cotton swab.
• Store the rig upright in a safe spot.

Are Recycler Rigs Better For Flavor?

Yes. By rapidly cooling vapor and minimizing its exposure to air, recyclers preserve the delicate terpenes that define a concentrate's flavor. This makes them a top choice for flavor chasers.

What Is The Difference Between A Recycler And An Incycler Rig?

A recycler has external tubes for water to travel through, while an incycler's function is built inside the main body. Recyclers often give slightly better cooling because of the longer path, and they create a cool visual effect.

What Size Banger Do I Need For This Recycler Rig?

This rig has a 14mm female joint, so you will need a 14mm male quartz banger. The 90° joint angle is best matched with a standard flat-bottom banger.

Are Recycler Rigs Harder To Clean Than Standard Rigs?

They can be a little more challenging because of the extra chambers. However, a regular cleaning routine with isopropyl alcohol and salt works very well. Rinsing with hot water after each use also helps prevent buildup.

Are Mini Recycler Rigs Worth It?

Mini recyclers are great for preserving flavor and are very portable. They provide the same splash-free function, but larger recyclers like this one usually offer more cooling due to a larger water volume and longer vapor path.

To get the most out of your new Hittn recycler rig, you'll need a few accessories. This rig is the perfect centerpiece for a high-quality dabbing experience.

• Browse our full collection of Dab Rigs.
• Find the perfect 14mm Quartz Banger to pair with your rig.
• Explore our selection of Carb Caps to control airflow and maximize vapor.