The Honeybee Herb Whirlwind Quartz Banger – 90° | YL is our Yellow Line auto-spinner/vortex banger with a standard weld, a 25mm bucket top, a beveled edge, and a flat bottom. This is the version to check when your rig calls for a 90° banger. Joint variants are 10mm male, 14mm male, 18mm male, and 14mm female, so match both size and gender before ordering.
Unlike a basic static bucket, the Whirlwind uses built-in vortex airflow as part of the banger style. That gives the bucket its auto-spinner function while keeping the fit checks straightforward: angle, joint size, joint gender, and the 25mm bucket top are the details that matter most.
Key Features
Auto Spinner / Vortex style with built-in airflow channels.
90° angle for rigs that call for a right-angle banger connection.
25mm bucket top diameter with a beveled top edge and flat bottom.
Yellow Line construction with a Standard Weld and Standard arm style.
Start with the angle. If your rig uses a vertical joint, a 90° banger is the layout to check so the bucket can sit level. Then match joint gender: a male banger connects to a female rig joint, while a female banger connects to a male rig joint. This PDP's verified combinations are 10mm male, 14mm male, 18mm male, and 14mm female.
If your rig needs an angled connection instead, compare the 45° Whirlwind YL. If you are still comparing bucket styles, browse the full Quartz Bangers & Dab Nails collection.
What Does the Auto-Spinner / Vortex Style Change?
The Whirlwind's built-in airflow channels are the functional difference from a plain static bucket. When you draw through the rig, the channels create a vortex of airflow inside the bucket. If you use terp pearls, the banger itself contributes the spinning airflow; cap and pearl fit still matter, so do not treat every accessory as universal.
What Should You Pair With the 25mm Bucket?
The 25mm bucket top is the measurement to keep in mind when choosing a cap. Browse Carb Caps, then check the cap's stated fit instead of assuming it will seal this bucket. The beveled top edge is also part of the verified bucket geometry.
How Should You Heat and Maintain This Whirlwind?
This version is listed for Torch / Heat Wand heating. Heat the bucket evenly and avoid extreme temperature changes. For routine cleanup, swab residue while the quartz is warm, not hot; a small amount of isopropyl alcohol on a swab can be used for stubborn residue.
Even without the matching 'spinner carb cap,' this banger gets your rubies spinning effortlessly! I was surprised by how little suction was needed to get the balls moving. (No pun intended.)
Also, Honeybee Herb’s shipping and handling was incredibly fast—Florida to Oregon with standard shipping in just 5 days. Amazing!
This is hands down the best design for perfect, smooth, waste less hits. Huge ones. The airflow of the actual banger is a game changer. I paired it with 2 terp pearls and the vortex spinner carb cap. Phenomenal. I'm so happy with the quality of the quartz as well. Get it.
I use this banger so much and have never experienced any banger like this, it’s one of the best quality quartz you can get and last longer than any other one of my other bangers it didnt get cloudy or chazz for a long time
I'm fairly new to dabbing and I've bought a bunch of cheap bangers from the head shop up the street. It almost felt like no matter how well I cleaned the cheaper bangers they always ended up chazzing; whereas, the honeybeeherb bangers not only work better, and are easier to keep clean but you can tell the second you pick one up that it's quality material.
whirlwind gives excellent and efficient burn of concentrate smoke and leaves very little debris at bottom. hits are very intense and potent. very easy to clean and maintain. fits perfectly in 25 mm axial e-nail. high quality piece. recommend to everyone.
Ted
The whirlwind bucket is a superior quality bowl. Super great for making terp pearls spin inside the bowl. Highly recommend to those in the dabbing community.
I love this banger! Kinda sucks that I bought the recommended carb cap to go with it because this thing works best with a slurper marble as it's cap. Otherwise, it spins pearls really fast, even my 8mm ones, and has lasted me a few months now with no signs of divitrifaction! Definitely would recommend, but would make sure that you have a pretty big marble as some smaller ones don't work. I use the one that came with the terp chain set from honeybee as well.
It took some experimenting to figure out how best to this banger. Now I get it and it is a great banger! the holes on the sides are really cool for moving the dab sauce around. And with a carb cap, you can get some pretty awesome hits.
Ordering was easy, and the package came quickly.
I am very pleased with my purchase.
"YL" stands for Yellow Line, which is our name for second-quality products. These items have the exact same design and are made from the same high-quality 100% quartz as our premium bangers. They simply have minor cosmetic blemishes—like a small scratch or an imperfect weld—that do not impact function, heat retention, or durability in any way.
What Size Terp Pearls Work Best In The Whirlwind Banger?
The Whirlwind banger's vortex is powerful enough to spin most standard terp pearls. For the best performance, we recommend using one or two pearls in the 4mm to 6mm size range. This size provides enough mass to retain heat and move freely without getting stuck in the air channels.
What Is The Difference Between A Whirlwind And A Terp Slurper?
A Whirlwind is an auto-spinning bucket banger, where the vortex action happens inside a traditional bucket shape. A terp slurper has a more complex design with a bottom dish and vertical slits, which vacuums oil up into the main chamber. While both are highly efficient, the Whirlwind is simpler to use and clean, making it a better daily driver for many users.
How Long Should I Heat Up My Quartz Banger?
For low-temp dabs, heat the banger evenly for about 20-30 seconds. Then, let it cool down for 45-90 seconds. The ideal temperature is between 450-600°F. The exact time will depend on your torch, but the key is to avoid getting the quartz glowing red, as this can degrade your concentrates and the banger over time.
Why Is My Quartz Banger Turning Cloudy?
A cloudy banger, also known as chazzing or devitrification, is caused by repeated overheating and/or cleaning the banger while it's too hot. The surface of the quartz begins to break down and can no longer be cleaned. To prevent this, dab at lower temperatures and clean your banger with a cotton swab after it has cooled slightly but is still warm.
Choosing a selection results in a full page refresh.