5 inch honeycomb disc recycler ash catcher in smoke gray glass add on attachment designed to trap ash and boost filtration for bongs
Click to open expanded view
Brand: Lookah

5 INCH HONEYCOMB DISC RECYCLER ASH CATCHER

Price
$27.00

Angle/Type: 90° Degree / 14 Female

Size: 5 INCH

Color: Smoke Gray

In stock and ready for shipping

Free Discreet Shipping

  • Free Express over $150
  • Fast & Low Cost Shipping to Canada
  • International Shipping Available
5 inch honeycomb disc recycler ash catcher in smoke gray glass add on attachment designed to trap ash and boost filtration for bongs

5 INCH HONEYCOMB DISC RECYCLER ASH CATCHER

Angle/Type: 90° Degree / 14 Female Size: 5 INCH Color: Smoke Gray

$27.00

This 5-inch Multi-Arm & Color Honeycomb Perc Ash Catcher is a smoke-gray glass add-on for water pipes with a vertical 90° 14mm male joint. Its 14mm female connection sits over the matching male joint, while the multi-arm perc and honeycomb disc add two water-diffusion stages before smoke reaches the main chamber. Browse the ash catcher collection if you need a different joint or angle.

If your main goal is catching ash before it reaches the water pipe while adding extra percolation, this design handles both jobs in one attachment. The part to check before ordering is fit: joint size, joint gender, and angle all need to match your piece.

Key Features

  • 5-inch ash catcher with a smoke-gray finish
  • 14mm female joint for a matching 14mm male connection
  • 90° angle for vertically oriented joints
  • Multi-arm perc plus honeycomb disc perc
  • Borosilicate glass construction

Product Specifications

Specification Details
Product Type Dual-perc ash catcher
Height 5 inches
Joint 14mm female
Angle 90°
Percolators Multi-arm perc + honeycomb disc perc
Material Borosilicate glass
Color Smoke Gray

Also Known As

  • Dual-Perc Ash Catcher
  • Honeycomb Perc Ash Catcher
Read More Details

How Do the Multi-Arm and Honeycomb Percs Work Together?

The multi-arm section starts the diffusion by splitting the smoke path through several arms. From there, the honeycomb disc breaks the flow into many smaller bubbles. Together, the two perc stages increase water contact before the smoke enters the main water pipe.

Will This 14mm Female Ash Catcher Fit Your Water Pipe?

Match this ash catcher to a 14mm male joint that sits vertically at 90°. If you are unsure about your connection, check the joint-size guide before ordering. Also make sure your water pipe has enough clearance and stability for the added 5-inch glass attachment.

How Should You Clean This Dual-Perc Ash Catcher?

Empty the water after use and rinse away loose debris. For deeper buildup, use an appropriate glass cleaning solution or isopropyl alcohol with coarse salt, shake gently, then rinse thoroughly. Because this piece has internal multi-arm and honeycomb sections, regular rinsing helps keep residue from building up in the harder-to-reach areas.

FAQ

What Joint Size Will This Ash Catcher Fit?

The joint size for this model is not stated on this page. It is essential that you measure your water pipe's joint (e.g., 14mm or 18mm) and purchase an ash catcher that explicitly matches that size and gender.

Is This A 45-Degree Or 90-Degree Ash Catcher?

The angle is also not stated. You must match the angle of the ash catcher to your water pipe’s downstem joint. A 90-degree catcher is for vertical joints, while a 45-degree one is for angled joints.

How Much Water Should I Put In A Recycler Ash Catcher?

Start by adding just enough water to cover the honeycomb disc. Pull air through it; if it cycles smoothly without splashing into the connector joint, the level is good. If it splashes, pour a small amount out.

Does A Honeycomb Ash Catcher Add Much Drag?

When clean, a honeycomb disc adds minimal drag due to its many holes. However, if the holes become clogged with resin, drag will increase noticeably. Regular cleaning is the key to maintaining smooth airflow.

How Often Should I Clean A Honeycomb Recycler?

For best performance and to prevent clogs, we recommend rinsing the ash catcher with hot water daily or after each long session. A deep clean should be performed weekly or whenever you notice increased drag.

Always verify joint specs, use minimal water, and clean regularly to prevent drag and clogs.