HITTN 4 ARM TREE PERC GLASS ASH CATCHER

Price
$15.99

Angle/Type: 45° Degree/Male

Size: 14mm

Color: Green

Out of stock
Buy Hittn 4 Arm Tree Perc Ash Catcher in green for smoother hits – available now at Honeybee Herb
Angle/Type: 45° Degree/Male / Size: 14mm / Color: Green

Stock Notification

Get notified when this product is available again

Discreet Shipping

Free Express over $150

Fast & Low Cost Shipping to Canada

International Shipping Available

Buy Hittn 4 Arm Tree Perc Ash Catcher in green for smoother hits – available now at Honeybee Herb

HITTN 4 ARM TREE PERC GLASS ASH CATCHER

Angle/Type: 45° Degree/Male Size: 14mm Color: Green

Price
$15.99
Free Shipping Order Over $50

The Hittn 4 Arm Tree Perc Glass Ash Catcher is a 14mm male ash catcher for water pipes with a matching 14mm female joint. It is offered in 45° and 90° versions, so the main fit check is matching the joint size, gender, and angle to your current piece.

The 4-arm tree percolator adds a water-filtration stage while the ash catcher helps intercept ash and debris before it reaches the main chamber. If you are replacing or adding an ash catcher, check your joint first rather than choosing by appearance alone.

Key Features

  • 4-arm tree percolator for added water diffusion.
  • 14mm male joint for a matching 14mm female water-pipe connection.
  • Available in 45° and 90° joint-angle versions.
  • Borosilicate glass construction.
  • Available in Blue, Yellow, Green, Lake Green, and Black.

Product Specifications

Specification Details
Brand Hittn
Product Type Glass ash catcher
Material Borosilicate glass
Joint Size 14mm
Joint Type Male
Angle 45° or 90°
Percolator 4-arm tree perc
Internal Downstem 29mm
Color Options Blue, Yellow, Green, Lake Green, Black

Also Known As

  • Tree Perc Ash Catcher
Read More Details

Which Hittn Ash Catcher Angle Fits Your Water Pipe?

Match the ash catcher to the angle of your water pipe’s joint so the chamber can sit in a practical upright position. The 45° version is the one to check for an angled connection, while the 90° version is for a vertical connection. Many beaker-style pieces use an angled joint and many straight tubes use a vertical joint, but check your actual piece before ordering.

This model uses a 14mm male joint, so it needs a matching 14mm female connection. If you are not sure of your size or gender, use Honeybee Herb’s joint-size guide before choosing a variant.

How Does the 4-Arm Tree Perc Work?

The tree perc splits airflow through four arms and into the water inside the ash catcher. That gives the smoke an extra water-contact stage before it enters the main piece, while the catcher chamber collects ash and debris that would otherwise travel farther into the water pipe.

If you want to compare this design with other perc and dry styles, browse the full ash catcher collection.

How Should You Set Up and Clean This Tree Perc Ash Catcher?

Add enough water to cover the perc openings, then test the draw before loading the bowl. If water reaches the bowl or pulls into the main chamber too easily, reduce the water level. Make sure the joint seats securely and that the added glass has enough clearance around the body of your water pipe.

Because a tree perc has multiple arms, regular rinsing helps keep residue from building up in the smaller passages. For a deeper clean, use a glass-appropriate cleaning method and rinse thoroughly before the next use.

FAQ

Will An Ash Catcher Add A Lot Of Drag To My Bong?

Any water percolator will add some drag. A 4-arm tree perc adds a moderate amount due to its high diffusion. While you might notice it, most users find the trade-off for a much smoother hit is worth it.

How Much Water Should I Put In My Tree Perc Ash Catcher?

Use just enough water to cover the small slits at the bottom of the arms. Overfilling can cause water to splash into your bowl or get pulled into the bong. Start with a small amount and test it.

I Have A Beaker Bong. Do I Need A 45° Or 90° Angle?

You almost certainly need a 45-degree ash catcher. Beaker bongs typically have slanted downstems that require a 45° joint to keep the accessory upright and stable.

Is It Hard To Clean The Arms Of A Tree Percolator?

It can be trickier than an open chamber, but it's manageable. Shaking it hard with an alcohol and salt solution is usually enough. For very stubborn spots, a long soak will loosen the resin inside the arms.

Will A 14Mm Ash Catcher Fit My 18Mm Bong?

No, the joint sizes must match for an airtight seal. You need a 14mm ash catcher for a 14mm joint and an 18mm for an 18mm joint. A direct fit is always best.