The Honey & Milk Bevel Quartz Banger is a 45° bucket-style quartz banger for rigs with an angled connection. This Yellow Line version uses a standard weld, a 25mm bucket, an opaque flat bottom, and a beveled top edge.
This product is offered with a male joint in 10mm and 14mm sizes. If your rig uses a 45° female joint, match the banger size to the rig before ordering. The 25mm bucket and beveled rim also give you the key fit details to check when choosing a carb cap.
| Specification | Details |
|---|---|
| Material | Quartz |
| Joint Type | Male |
| Joint Size | 10mm and 14mm |
| Angle | 45° Degree |
| Weld | Standard Weld |
| Bucket Top Diameter | 25mm |
| Bottom Material | Opaque |
| Bottom Style | Flat |
| Arm Style | Standard |
| Top Edge | Bevel |
| Style | Bucket |
| Heating Type | Torch / Heat Wand |
Start with the rig joint, not the bucket diameter. This banger uses a male joint, so it needs a female rig connection in the same size. Choose 10mm for a 10mm joint or 14mm for a 14mm joint, and use the 45° version when the rig’s joint is angled. If your setup takes a vertical 90° banger, this is the wrong angle.
The bucket top diameter is 25mm and the rim is beveled. When shopping carb caps, check the cap’s fit guidance against that 25mm opening and beveled edge rather than assuming any cap is universal. That is the practical fit check that matters here.
This model is listed for torch / heat wand heating. Heat-up and cooldown time can vary with your equipment and routine, so use a temperature-control method appropriate to your setup rather than relying on a fixed timing copied from another banger.
!